Rainwater dispersal products are produced in house to your requirements. In the product range for gutters are single skin, Galvanised GAM – Galvanised after manufacture, Membrane, insulated, trimline and aluminium. All products can be produced up to 4 metres long. Mastic and fixings are provided where applicable. Stop ends, junctions, corners, outlets and T sections are also produced in house. Rainwater pipes are also produced form aluminium PPC to plastisol, round or square. Single or 2 piece brackets and be provided along with bends, collars and shoes.
Single Skin Gutters
Galvanised 1.5mm – 5.0mm up to 4000mm Long – utilising standard Z275 Galvanised steel
GAM – Post Galvanised Gutters 1.6mm – 3.0mm
Aluminium 1.5mm – 5.0mm up to 4000mm Long – Mill Finished, Powder Coated, Anodised
Fixings and Mastic
Membrane Coated Steel 1.2mm / 1.2mm up to 4000mm Long
For total peace of mind, once a membrane gutter utilising 1.2mm membrane bonded to 1.2mm steel has been installed by trained installers, each gutter heat welded to the next with a simple overlap, the gutter is watertight and guaranteed for 25 years.
Corners, stop ends, outlets and t sections are also manufactured to suit your requirement along with the associated rainwater pies and brackets.
Trimline Gutters up to 4m long
Aluminium Mill Finished, PPC, Anodised Pre-coated
Plastisol Leathergrain Single and Double Sided
Stop ends, outlets, gutter support arms, corners and T sections can be provided to suit you requirement
Galvanised, Aluminium or Membrane Insulated gutters can be provided in lengths up to 4m long using 0.7mm Bright White Lining Enamel as the inner skin. Different thickness insulation is used to create the desired U value specified.
Stop ends, outlets, gutter support arms, corners and T sections can be provided to suit your requirement
In-house we can produce rainwater pipes, bends, shoes, hoppers, weirs, swan necks with brackets from aluminium with powder coating option along with pre-coated steel in various colours.