LokFaçade has been designed to provide a cost-effective and aesthetically pleasing cladding solution for soffits, fascias, canopies and external walls without the length restrictions on a typically used brake pressed plank profiles.
Available in a fixed width of 300mm, LokFaçade is available with two basic formats, designed to fit either flush or with a shadowline, which can be interchanged to create a number of aesthetically pleasing designs.
LokFaçade is available with a with and without a micro-ribbed profile finish. Micro-ribs not only provide a pleasing appearance but also help to avoid deformation of the profile which can be inherent in any metal fabrication.
A feature of LokFaçade is the very simple installation procedure, fitted directly to the structure of the building.
The first panel is fixed in place to the substrate. Subsequent panels are then simply pushed into place together with mineral fibre insulation in the void behind the exterior façade depending on thermal requirements.
The trailing edge of the panel is then fixed in place before adding the next panel, providing a secret fixed solution which is as simple and speedy to install as it is easy on the eye. Installation is completed by a flashing, which covers the remaining fixings at the extremities.
Max panel length:
Panel length limited by practical handling considerations – typically up to 10m.
LokFacade is available in both pre-painted steel and aluminium. Typically utilising 0.7mm thick steel and 1-1.2mm aluminium. Each project needs to be taken on its on merit so we suggest you contact our team for advice.